Mechanical Tap Timer
Ezy Grip Tap Timer
The Holman Outlet Mechanical Tap Timer fits to a standard garden tap and times the water flow to any garden hose or watering system connected. This timer allows you to have one individually timed outlet, as well as having unattended watering for a time less than 2 hours. Simply connect your hose or poly pipe irrigation system to the outlet.
The Selection Dial can be turned to any other position during a run time. Use to either increase or decrease the programmed time, or to change to manual setting or to turn the timer off.
1. Screw inlet securely onto a garden tap.
2. Connect garden hose or poly pipe fittings to the outlet(s).
3. Turn the large dial to the required watering run time. (time starts to count down immediately)
4. Turn on the tap.
Warning: Do not use in freezing conditions.
Before winter or snow remove your timer from the tap to avoid the unit from freezing.
The timer doesn’t appear to be UV stabilised, as after a year the “rubber” slowly vanished.
It wasn’t a deal breaker, just annoying.
After a few years the unit just burst open when shutting off in summer
It was always turned off and disconnected in winyer.